C4i HDC-EHB70ARC Manuel de l'utilisateur - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} C4i HDC-EHB70ARC. C4i HDC-EHB70ARC 10 pages. 18gbps hdbaset extender (70m) with arc

Imprimer la page
No.
Name
SPDIF OUT Optical fiber audio signal output port.
9
IR IN
10
IR OUT
11
12
RS-232

5.2 Receiver Panel

PWR
1
DC 24V
4
No.
Name
1
Power LED The red LED is on when the Transmitter is powered on.
AUDIO DIP
2
switch
Connect to IR receiver cable, the IR receive signal will emit
to the IR OUT port of the Receiver.
Connect to IR blaster cable, the IR emit signal is from the IR
IN port of the Receiver.
3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through between the
Transmitter and Receiver.
HDMI OUT
6
5
7
▪ When the HDMI IN port is connected to a signal source
device with ARC function (e.g. Amplifier or Soundbar), the
ARC function of the Extender is enable:
Swicth to "HDMI ARC" : the audio returned from the HDMI
OUT port of Receiver will be output through the HDMI IN port
and SPDIF OUT port of the Transmitter.
Swicth to "SPDIF IN" : the audio returned from the SPDIF
IN port of Receiver will be output through the HDMI IN port
and SPDIF OUT port of the Transmitter.
▪ When the HDMI IN port is connected to a common signal
source device, the ARC function of the Extender is disable,
the audio from the SPDIF IN port of the Receiver will be
output through the SPDIF OUT port the Transmitter.
Function Description
HDMI ARC
SPIDF IN
ARC
SPDIF IN
8
9
Function Description
5 / 8
SERVICE
AUDIO
2
3
RS-232
IR IN
IR OUT
10
11
12