Acdeos AXS FL Instructions d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Instructions d'installation pour {nom_de_la_catégorie} Acdeos AXS FL. Acdeos AXS FL 7 pages. Fixed step
Également pour Acdeos AXS FL : Manuel condensé (17 pages)

Acdeos AXS FL Instructions d'installation
AXS – Fixed Step Manual

1 Technical specifications

Product description
Fixed step step for mounting outside under the floor of a vehicle.
Installation
Under the vehicle Floor at the front- middle or rear door
Dimensions
Step depth 200 mm - width depending on model.
For detailed dimensions please refer to the installation drawings
Weight
depending at model.
Load
Maximum load 150 Kg (1500 N).
Materials
Frame; steel plate work, EP paint protected.
Step: Aluminum non slip profile and Plastic corner pieces.

2 Safety instructions

These Safety instructions should always be with the step. The operator must be
made aware of these instructions before operating the Step. Read these safety
instructions carefully and follow them.
The step is constructed to be an extra step to enter a vehicle. It should be used appropriately by
passengers as long as they are not heavier as the maximum load, to enter or exit a minibus, taxi camper
or other vehicle.
1. It is recommended to step on the middle of the step platform.
2. The step platform must be kept clean and free of oil and other slippery materials.
3. When you have any doubt about the safety of passenger when using the step make sure
he is assisted.
4. For any questions about the safe operation of the step, directly contact the responsible
persons.
5. Never use the step for any other use than here described.
6. Never overload the step.
7. Repair and maintenance must be done by qualified and trained staff only.
8. Only use original parts if you have to exchange parts from the step.
9. If the anti slip profile at the step becomes slippery because of wear, the step platform
must be replaced.
10. Always use the recommended cleaning materials.
11. Report any unsafe condition of the step, or during it's operation, to the step supplier.
3 Constraints
The AXS Step On has been designed to be functional and reliable. The product is made as simple
and reliable as possible. It has been taken in consideration that the step will be mounted under a
vehicle in severe environmental conditions
AXS –FL Fixed Step Manual Vers 2.0
2