Cisco Linksys WET610N Manuel d'installation rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Cisco Linksys WET610N. Cisco Linksys WET610N 12 pages. 802.11ac
Également pour Cisco Linksys WET610N : Manuel d'installation rapide (49 pages), Manuel d'installation rapide (20 pages), Manuel de l'utilisateur (17 pages), Configuration (3 pages)

Imprimer la page
Cisco Linksys WET610N Manuel d'installation rapide
Installation
M.
The available networks are
listed in the table. Select your
network, and then click Next.
(If your router supports Wi-Fi
Protected Setup, which is
indicated by the
to the network name, then
proceed to the section, "Wi-Fi
Protected Setup".)
If your network is not listed, select My network is not in this list, and
click Next. Proceed to step O.
N.
If your network does not use
wireless security, proceed to
step P.
If your network uses wireless
security, enter the security key
of your wireless network. Click
Next. Then proceed to step P.
O.
Configure the following:
Wireless Network Name
(SSID)
Enter the name of your
wireless network.
Authentication Type
the authentication used by your
wireless network.
Encryption Type
the encryption used by your
wireless network.
Security Key
Click Next.
NOTE:
may want to configure wireless security on your router if you
have not already done so.
6
icon next
Select
Select
Enter the security key of your wireless network.
If you are connecting to your own wireless network, you
Wireless-N Ethernet Bridge with Dual-Band
WET610N