Cisco Linksys WET610N Manuel d'installation rapide - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Cisco Linksys WET610N. Cisco Linksys WET610N 12 pages. 802.11ac
Également pour Cisco Linksys WET610N : Manuel d'installation rapide (49 pages), Manuel d'installation rapide (20 pages), Manuel de l'utilisateur (17 pages), Configuration (3 pages)

Imprimer la page
Cisco Linksys WET610N Manuel d'installation rapide
WET610N

Wi-Fi Protected Setup

A.
Use Wi-Fi Protected Setup to
create a wireless connection
between the Bridge and your
router. On your router, press the
button that looks like one of the
icons in the picture. You may
have to hold down this button
until an LED flashes.
Within two minutes, click
Connect on the Quickly Connect
Using Push Button screen.
B.
Please wait while the Setup Wizard connects the Bridge to your wireless
network. Warnings from your firewall or security application may
appear. If necessary, click Always allow or Allow this time only to
allow the wireless connection.
C.
You will connect the Bridge
to the device that you want to
equip with wireless.
Click Next.
D.
The Bridge is connected to your
router with a network cable.
Disconnect this network cable
from your router.
If you need to move the device
that you want to equip with
wireless, then do so now. Click
Next.
Wireless-N Ethernet Bridge with Dual-Band
Wi-Fi Protected Setup Button on Router
Wi-Fi Protected Setup
9