CAAS Audio Elysian 100 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CAAS Audio Elysian 100. CAAS Audio Elysian 100 11 pages. Mono-block amplifier

Imprimer la page

Specification

All specifications are subject to change at any time. Single Channel Mono-block Amplifier.

Gain

Frequency Response:

Maximum Input

Maximum Output

Rated Output

Input Impedance

Output Impedance

Input Sensitivity

Speaker Impedance

Total Harmonic Distortion

Transient Intermodulation

Output SNR (A-WTD)

Slew rate

Output DC Offset

Power Consumption

Mains Voltage

Fuse Rating

Operating Temperature

Thermal Cut-off Protection

Input Connectors

CAAS Link Trigger

Output Terminals

Mains Transformers

Dimensions

Weight

The Reference standard E100 features:

CAAS Audio's proprietary "Coupled Symmetric Drive" (CSD) open loop, voltage gain

topology.

Bespoke Voltage amplifier Perfect Isolating "VPI" driver stage.

DC coupled from input to output (NO capacitors in the signal path).

A true zero feedback design (NO global or local feedback).

Six bespoke, discrete regulated power supplies with over 100,000uF of power supply

capacitance.

Separate transformers and power supply for the voltage amplifier and current amplifier.

The application of RF circuit design, layout and stability techniques.

Ultra low Transient Intermodulation Distortion (TIM).

Linear phase response with zero feedback essential for a truly open sound with high clarity,

detail and dynamic.

10. CAAS Link 12V trigger for automated sleep mode.

25.5dB (into 8ohms)

0.8Hz to >300kHz (-3dB) DC Coupled

10Hz to 50kHz (-0.1dB)

10V peak

44V peak

100W into 8ohms (1st 20W Class A)

200W into 4ohms

33kohms (single ended RCA)

66kohms (balanced XLR)

0.1ohm

1.6V RMS single ended (for 100W output into 8ohms)

Any (output power will vary)

<1% @1kHz (100W into 8ohms)

<1% @1kHz (200W into 4ohms)

<0.01% @1kHz (1W, 0dBW into 8ohms)

Too low to measure

Better than 90dB (0dBW output, input grounded)

100V/us (No input filter, max output)

<10mV

100W (Idle), 400W (max)

<0.5W trigger high (amp power down mode)

220V to 240Vac

T3.15A, 250V (slow blow)

45 degrees C - 55 degrees C

25 - 35 degrees C above ambient.

70 degrees C (Reset at 55 degrees C)

1 x Unbalanced gold plated RCA

1 x Balanced silver plated XLR

12V DC to turn off (0V for on)

2 x High current gold plated

1 x 300VA (toroidal) & 1 x 50VA (toroidal)

140mm high, 260mm wide, 340mm deep.

11kg / channel