Cisco Nexus 3000 series Installation - Page 3

Parcourez en ligne ou téléchargez le pdf Installation pour {nom_de_la_catégorie} Cisco Nexus 3000 series. Cisco Nexus 3000 series 8 pages. Switch chassis
Également pour Cisco Nexus 3000 series : Manuel d'installation du matériel (6 pages), Manuel d'installation (12 pages), Livre blanc sur les produits (7 pages), Manuel de démarrage rapide (14 pages), Manuel (16 pages)

Installing the Switch Chassis

Tip

Keep the shipping container in case the chassis requires shipping at a later time.

Before you begin

Before you unpack the switch and before you handle any switch components, be sure that you are wearing a

grounded electrostatic discharge (ESD) strap. To ground the strap, attach it directly to an earth ground or to

a grounded rack or grounded chassis (there must be a metal-to-metal connection to the earth ground).

Check for damage and report any discrepancies or damage to your customer service representative. Have the following

information ready:

• Invoice number of shipper (see packing slip)

• Model and serial number of the damaged unit

• Description of damage

• Effect of damage on the installation

Attaching L-Brackets to the Chassis

You attach two L-brackets to each side of the chassis. These brackets hold the chassis in place on a flat surface.

Before you begin

• You must have the following tools and equipment:

Step 1

Align the hole in the L-bracket with the hole on the side of the chassis. Attach the L-bracket with a screw using a

Phillips-head screwdriver. See the following figure.

• Phillips-head screwdriver

• L-brackets (4) and screws (4)

Attaching L-Brackets to the Chassis

Installing the Switch Chassis