Cisco NM-1FE-TX - Interface Module Ethernet Fiche technique - Page 2

Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Cisco NM-1FE-TX - Interface Module Ethernet. Cisco NM-1FE-TX - Interface Module Ethernet 8 pages. 2600/3600/3700 series lan connectivity modules

Imprimer la page
Cisco NM-1FE-TX - Interface Module Ethernet Fiche technique
• NM-1FE1CE1B—One 10/100 Ethernet with one ISDN/PRI or Channelized E1 (balanced)
• NM-1FE2CE1B—One 10/100 Ethernet with two Channelized E1 or ISDN/PRI (balanced)
• NM-1FE1CE1U—One 10/100 Ethernet with one Channelized E1 or ISDN/PRI (unbalanced)
• NM-1FE2CE1U—One 10/100 Ethernet with two Channelized E1 or ISDN/PRI (unbalanced)
Ethernet
• NM-4E—Four-port Ethernet
• NM-1E—One-port Ethernet
• NM-1E2W—One-port Ethernet, plus two WAN interface card slots
• NM-2E2W—Two-port Ethernet, plus two WAN interface card slots
• Token Ring
• NM-1E1RW—One-port Token Ring, one-port Ethernet, plus two WAN interface card slots
Fast Ethernet Connectivity
Figure 2
Fast Ethernet and 10BaseT Ethernet Network Modules Including: NM-1FE-TX, NM-1FE-FX, NM-4E, NM-1E
Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking
features and standards. Single port network modules offer autosensing 10/100BaseTX or 100BaseFX Ethernet.
The TX version supports virtual LAN (VLAN) deployment.
In customer networks, these modules may be useful for the following:
• Uplink to Fast Ethernet backbones on Catalyst
• VLAN support on the NM-1FE-TX module, allows network managers to group users logically rather than
by physical location, easing adds, moves, and changes within the network. The Cisco Inter-Switch Link (ISL)
protocol enables VLAN traffic communication with Catalyst 6500, 5000, 5500, and Catalyst 3000 series
switches.
• Provides inter-VLAN routing services between VLANs on any Catalyst series switch that supports VLANs.
The module will offer future support the new 802.1Q VLAN standard.
– Cabling—RJ-45 connector for 1FE-TX, fiber connector for 1FE-FX
– LEDs—Network module status indicator, status LEDs for link status, LAN speed, and half/full duplex
– Network interfaces—One 10/100 base-TX or FX port
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
®
series switches and other Cisco routers.
Cisco Systems, Inc.
Page 2 of 8