CAB 4126C Manuel d'instructions pour l'assemblage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour l'assemblage pour {nom_de_la_catégorie} CAB 4126C. CAB 4126C 14 pages. Stroke applicator

Imprimer la page
2

Product Description

6
2.1

Important Features

•
The supporting air and the vacuum as well as the speed of the cylinder are adjustable. That way the applicator
can be adapted to different label materials and sizes.
•
To avoid contamination within the vacuum channels they are cleaned by air pressure pulses at the end of each
application.
•
For operation within a system the I/O interface of the printer can be used.
2.2

Technical Data

Stroke Applicator
Cylinder stroke
Product height
Horizontal cylinder
Labeling onto the product
Compressed air pressure
Blow tube
Cycle time about frequency aprox. labels/min.
Tamp pad
Label width
Label height
Product distance to lower edge
Immersion depth pad F
Product during labeling
Tamp pad spring-loaded
Label width
Label height
Product distance to lower edge
Product during labeling
Roll on pad
Label width
Label height
Product distance to lower edge
Product during labeling
1)
Determined at 100 mm label height / print speed 100 mm/s.
2)
Immersion depth at applicator >25 mm, the cover of the Hermes C must be modified.
Table 1
Technical Data
mm
mm
bar
number
1)
4126C-11 F 4126C-12 F 4126C-19 F
mm
mm
up to mm
2)
mm
mm
mm
up to mm
mm
mm
mm
4126C-300
4126C-400
300
400
variable
variable
25
25
from the top,
from the top,
from below,
from below,
from the side
from the side
4,5
4,5
1
1
20
20
46-174
20-100
220
320
90
fixed
4126C-3900
80-174
80-150
215
315
fixed
4126C-4900
50-174
80-150
245-275
345-375
in motion
4136C-300
4136C-400
300
400
variable
variable
25
25
from the top,
from the top,
from below,
from below,
from the side
from the side
4,5
4,5
2
2
20
20
-
-
-
-
-
-
4136C-3900
80-174
151-350
215
315
fixed
4136C-4900
50-174
151-350
275-360
375-460
in motion
6