Cisco RV132W Manuel de démarrage rapide - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco RV132W. Cisco RV132W 14 pages. Adsl2+ wireless-n vpn router
Connecting the Cisco RV132W
3
You must connect one PC with an Ethernet cable for the purpose of
N
OTE
the initial configuration. After you complete the initial configuration,
administrative tasks can be performed using a wireless connection.
Power off all equipment, including the cable or DSL modem, the
S
1
TEP
PC, and the Cisco RV132W.
For an Ethernet WAN connection, connect one end of the Ethernet
S
2
TEP
cable to your Internet access device (typically a modem), and
connect the other end of the cable to the WAN port.
For an ADSL connection, connect your DSL cable directly to the
ADSL port on the device. If required by your Service Provider,
make sure that you use an ADSL splitter.
For a 3G/4G WAN connection, connect the 3G/4G USB dongle into
the USB port. Then, the firewall router will detect the 3G/4G dongle
and subscribe to the ISP network.
Note: This application must use the specific 3G/4G dongle which is
supported by the router. The 3G/4G SIM card must be configured
with the user defined PIN code.
Connect another Ethernet cable from one of the LAN (Ethernet)
S
3
TEP
ports to the Ethernet port on the PC.
Power on the cable or DSL modem and wait until the connection is
S
4
TEP
active.
Connect the power adapter to the device's POWER port.
S
5
TEP
Use only the power adapter that is supplied with the unit.
C
AUTION
Using a different power adapter could damage the device.
The POWER button is on by default. The power light on the front
panel is solid green when the power adapter is connected
properly and the device is finished booting.
Plug the other end of the adapter into an electrical outlet. Use the
S
6
TEP
plug (supplied) that is specific to your country.
Continue with the instructions in the
S
7
TEP
configure the device.
6
Cisco RV132W ADSL2+ Wireless-N VPN Router Quick Start Guide
Using the Setup Wizard
to