Cisco SG 300-10P Manuel de démarrage rapide - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco SG 300-10P. Cisco SG 300-10P 17 pages. Managed switches
Également pour Cisco SG 300-10P : Manuel de démarrage rapide (17 pages), Fiche technique (14 pages), Spécifications (2 pages), Manuel d'installation rapide (10 pages), Manuel de démarrage rapide (18 pages), Manuel de démarrage rapide (17 pages)

Unusually long access time:

Due to the standard spanning tree loop detection logic, adding new

connections may take 30 to 60 seconds for the affected interfaces

and/or LAN to become operational.

Features of the Cisco Small Business

300 Series Managed Switch

This section describes the exterior of the managed switches including

ports, LEDs, and connections.

Front Panel Ports

The ports and LEDs are located on the front panel of the switch.

RJ-45 Ethernet Ports—Use these ports to connect network devices, such

as computers, printers, and access points, to the switch.

SFP (if present)—The small form-factor pluggable (SFP) ports are

connection points for modules, so the switch can link to other switches.

These ports are also commonly referred to as miniGigaBit Interface

Converter (miniGBIC) ports. The term SFP will be used in this guide.

• SFP ports are compatible with Cisco modules MGBT1, MGBSX1,

MGBLH1, MGBLX1, MGBBX1, MFELX1, MFEFX1, and MFEBX1, as well as

other brands of modules.

• Some SFP interfaces are shared with one other RJ-45 port, called a

combo port. When the SFP is active, the adjacent RJ-45 port is

300 Series Managed Switches