CAB CSQ 401 Manuel d'instructions de montage - Page 13

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions de montage pour {nom_de_la_catégorie} CAB CSQ 401. CAB CSQ 401 20 pages.

Imprimer la page

Printer Configuration

Note!

The values of the setup are basic settings for the current printer/cutter

combination.

After changing the cutter or printer a re-adjustment may be necessary.

Changes required for processing different print jobs should be imple-

mented by additional offsets available in the software.

The offset values from setup and software are added together for

execution.

For detailed instructions for configuration

 Configuration Manual of the printer.

Cut Parameters

 Start menu.

 Select

Parameter

Device info

Calibrate

device

Cut position

Label Sensor

 Start menu.

 Select

Parameter

Label sensor

Setup >

Cutting.

Meaning

Information to the device:

Software version, counts of cuts and errors

Calibration of the lower blade end position.

 „5.4 Calibrating the cutter"

Offset of the cut position relative to the rear label

edge.

The setting can also be adjusted by the software.

The settings of configuration and software are

added together.

Setup >

Labels.

Meaning

Method for detecting the starting end of the label.

Gap Sensor: Detection using changes in the trans-

parency between the label and label gap.

Bottom-Reflect: Detection using reflex marks on the

bottom of the medium.

Continuous media: Checking the existence of media only.

Default

0.0 mm

Default

Gap

sensor