CABAC BM118 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} CABAC BM118. CABAC BM118 14 pages. Auto-check clamp-on series

Imprimer la page

600Ω/

Set the slide-switch function selector to the 600Ω/

●600Ω Resistance range with Audible-Continuity is the default function. It is an

extended low resistance range to complement the Resistance (Ω) function in

AutoCheck

mode. Audible-Continuity response time is also improved drastically

(from that of AutoCheck

Audible-Continuity is convenient for checking wiring connections and operation of

switches. A continuous beep tone indicates a complete circuit.

●Press SELECT button momentarily selects Diode test function. The reading shows

the approximate voltage drop across the test leads. When forward biased, normal

forward voltage drop for a good silicon diode is between 0.400V to 0.900V. A reading

higher than that indicates a leaky diode (defective). A zero reading indicates a shorted

diode (defective), and the meter gives a continuous beep warning. An OL indicates an

open diode (defective). Reverse the test leads connections (reverse biased) across the

diode. The display shows OL if the diode is good. Any other readings indicate the diode

Customer Care Australia P: 13122 F: 1300 303 310 E: [email protected] W:cabac.com.au

A: Distribution Pl, Seven Hills NSW 2147

Customer Care New Zealand P: 0800 966 969 F: 0088 6969 E: [email protected] W: cabac.co.nz

functions

mode) under such stand-alone range architecture.

position.