Cisco WS-X3011 Note de configuration - Page 22

Parcourez en ligne ou téléchargez le pdf Note de configuration pour {nom_de_la_catégorie} Cisco WS-X3011. Cisco WS-X3011 46 pages.

Imprimer la page

Access the Router Card Command-Line Interface

Conﬁguring the ISDN BRI Interface

The ISDN BRI interface is conﬁgured to allow connection to ISDN WANs. Determine which

protocols to support on the ISDN BRI interface and enter the appropriate responses. In the following

example, the router card is conﬁgured for IP, AppleTalk, and IPX:

After you have completed the entire initial router card interface conﬁguration using the System

Conﬁguration Dialog, proceed to the section "Conﬁguring ISDN" later in this document for

additional ISDN conﬁguration information.

Conﬁguring the Ethernet Interface

The Ethernet interface is conﬁgured to allow connection to a LAN. To conﬁgure the interface

parameters, you need to know your Ethernet interface network addresses.

Take the following steps to conﬁgure an Ethernet interface to allow communication over a LAN:

Step 1

Step 2

22 Router Card (WS-X3011) Conﬁguration Note

Configuring interface BRI0:

Is this interface in use? [yes]

Configure IP on this interface? [yes]

IP address for this interface: 172.16.71.1

Number of bits in subnet field [0]: 8

Class B network is 172.16.0.0, 8 subnet bits; mask is

255.255.255.0

Configure AppleTalk on this interface? [no]: yes

Extended AppleTalk network? [no]: yes

AppleTalk starting cable range [0]: 1

AppleTalk ending cable range [1]: 2

AppleTalk zone name [myzone]:

AppleTalk additional zone name: otherzone

AppleTalk additional zone name:

Configure IPX on this interface? [no]: yes

IPX network number [1]: B000

Press Return or enter yes to conﬁgure the LAN interface:

Configuring interface Ethernet0:

Is this interface in use? [yes]:

Determine which protocols you want to support on the LAN interface and enter the

appropriate responses. In the following example, the system is conﬁgured for IP,

AppleTalk, and IPX:

Configure IP on this interface? [yes]:

IP address for this interface: 172.16.72.1

Number of bits in subnet field [8]: 8