Epson V11H179020 - PowerLite S3 SVGA LCD Projector Informations sur le produit - Page 7
Parcourez en ligne ou téléchargez le pdf Informations sur le produit pour {nom_de_la_catégorie} Epson V11H179020 - PowerLite S3 SVGA LCD Projector. Epson V11H179020 - PowerLite S3 SVGA LCD Projector 15 pages. Supplemental / late breaking information
Également pour Epson V11H179020 - PowerLite S3 SVGA LCD Projector : Spécifications (2 pages), Manuel d'installation (19 pages), Manuel d'installation rapide (7 pages), Spécifications (1 pages)
Imprimer la page
Adjusting the Image Size
You can adjust your image size using the zoom buttons on
the projector, or zoom into a portion of the image using the
buttons on the remote control.
E-Zoom
Using the Zoom Buttons
To enlarge or reduce your image size in small increments, press
the
button to enlarge the image or press the
Wide
to reduce it.
Note: You can also move the projector closer to or farther from the
screen to adjust the image size.
Using the E-Zoom Buttons
The image is enlarged or reduced.
1. Press the
z button on the
E-Zoom
remote control.
A target scope is displayed on the
screen.
2. Press the u d l r buttons to
move the target scope to the center of the part you wish to
enlarge/reduce.
3. Push
z to enlarge the image. Push
E-Zoom
reduce the enlarged image.
enlargement ratio
❏
z: Enlarges part of the image without changing
E-Zoom
the size of the projection area.
❏
x: Reduces the part of the image that has been
E-Zoom
enlarged using the z button.
❏ You can scroll with the u d l r buttons.
Press
to cancel.
Esc
button
Tele
target scope
x to
E-Zoom
3/05
Epson PowerLite S3 Projector
Adjusting the Image Shape
When the projector is raised in the front or back, the display
distorts in the shape of a trapezoid.
Note: You can correct only vertical distortion with this function.
Press the
or
buttons to correct the distortion.
u
d
Note: The screen size changes when keystone correction is
performed.
If the images become uneven in appearance after keystone correction
is performed, decrease the sharpness setting.
Images can be corrected without distortion when the projector
is tilted to a maximum of ±10°.
When the projector must be placed off to the side of the screen,
you can use the Image Shift option to adjust the screen so it
appears straight. See the User's Guide for details.
Adjusting the Image Quality
You may need to adjust the projector's
settings on the Image menu if your computer image has any of
these quality problems:
❏ Flashing or blurry image
❏ Vertical or horizontal stripes
❏ Only a portion of the image is displayed
See the User's Guide for more information.
Note: You can also increase computer image clarity by pressing the
button on the remote control to optimize the tracking, sync,
Auto
and position settings. Turn off E-Zoom and A/VMute before using
the
button.
Auto
Epson PowerLite S3 Projector - 7
and
Tracking
Sync