Cisco 1800 Series Configuration - Page 21
Parcourez en ligne ou téléchargez le pdf Configuration pour {nom_de_la_catégorie} Cisco 1800 Series. Cisco 1800 Series 32 pages. Cisco ios software configuration
Également pour Cisco 1800 Series : Manuel de démarrage rapide (28 pages), Fiche technique (16 pages)
Configuring Radio Settings on an Access Point
Configuring Beacon Period and DTIM on an Access Point
Perform this task to configure the beacon period and delivery traffic indication message (DTIM).
The beacon period is the amount of time between AP beacons in Kilo microseconds. One
kilomicrosecond equals 1,024 microseconds. The Data Beacon Rate, always a multiple of the beacon
period, determines how often the beacon contains a DTIM. The DTIM tells power-save client devices
that a packet is waiting for them.
For example, if the beacon period is set at 100, its default setting, and the data beacon rate is set at 2, its
default setting, then the AP sends a beacon containing a DTIM every 200 kilomicroseconds.
The default beacon period is 100, and the default DTIM is 2.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
enable
configure terminal
interface dot11Radio interface
beacon {period microseconds | dtim-period period-count}
end
copy running-config startup-config
How to Configure Radio Settings on an Access Point
21