CABASSE MC 170 Manuel du propriétaire - Page 8
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} CABASSE MC 170. CABASSE MC 170 12 pages.
Imprimer la page
CONNECTION
Cable section
To get the full sonic potential of Cabasse loudspea-
kers and avoid power losses, the cables connecting
the speakers to the power amplifier must have the
lowest possible electrical resistance. To help you in
choosing the minimum correct cable gauge, follow
diagram.
Maximal lenght
between recommended
amplifier and loudspeakers
4.5 m
6 m
7.5 m
9 m
12 m
Phase
In order to maintain the phase relationship and
frequency balance of the loudspeaker system,
both loudspeakers must be properly connected to
the power amplifier. When properly connected,
the cones of the drivers of both loudspeakers will
move in the same direction when driven by identical
speakers will move in the same signals. If the cones
move in opposite directions, the resulting out of
phase signals will create a perceptible power loss,
particularly in the low frequencies. The stereopho-
nic message will also be degraded. Amplifier and
speaker manufacturers typically indicate connec-
tion polarity in one of two ways: red and black or
plus and minus. In either case, always connect red
or plus to red or plus and black or minus to black
or minus. Connections should be identical for both
channels. To check that the speakers are in correct
phase, switch the system to mono while music is
being played. if the amplifier does not have a phase
inversion switch, it will be necessary to change over
the connections on one only of the loudspeakers.
If in correct phase, the image should be distinctly
located between the loudspeakers with a slight
loss of bass and low midrange level. If the image
is confused and not centrally located and there is a
drastic loss of bass and low midrange level, recheck
your connections.
MAINTENANCE
The MC170 cabinets are made of medium density
fiber panels, either pvc veneered or protected by
5 layers of high gloss lacquer. These hi-tech finish
do not require any specific care. Use a wet cotton
waste for cleaning, or any cleaning device for wood
or plastic.
Because of technical improvements already under way in our constant search for optimum quality, Cabasse reserves the right to modify all the
models presented in specification sheets, advertising materials and manuals without prior notice.
section
1.5 mm
2
2 mm
2
2.5 mm
2
3 mm
2
4 mm
2
Position
Ways
Drivers
complement
Sensivity
1W/1m
(dB)
Cross-over
points
(Hz)
Frequency
response
(Hz)
Nominal
impedance
(ohms)
Minimum
impedance
(ohms)
Power
handling
(Watts)
Peak
power
(Watts)
Dimensions
h x w x d
Weight
SPECIFICATIONS & TECHNICAL DATA
ANTIGUA
main speaker
surround
bookshelf/
on stand
3
10T15MC
1 x 17TN20
88
700 - 3,600
60-20,000
8
3.2
70
550
40 x 23 x 30 cm
15.7x9.1x11.8 in
9 kg
20 lbs
JERSEY
SOCOA
main speaker
centre speaker
floorstanding
floorstanding
3
3
10T15MC
10T15MC
2 x 17TN20
2 x 13TN20
90
88
700 - 3,600
700-3,600
57-20,000
64-20,000
8
3.2
3.2
100
70
700
550
99 x 21 x 30 cm
18 x 50 x 38 cm
39x8.3x11.8 in
7.1x19.7x15 in
15 kg
9.7 kg
33 lbs
21.4 lbs
8