Cisco 800 Series Configuration - Page 27

Parcourez en ligne ou téléchargez le pdf Configuration pour {nom_de_la_catégorie} Cisco 800 Series. Cisco 800 Series 32 pages. Fast step software design guide
Également pour Cisco 800 Series : Notes de mise à jour (36 pages), Manuel de démarrage rapide (13 pages), Manuel de démarrage rapide (17 pages), Manuel de conception (50 pages)

Imprimer la page
Cisco 800 Series Configuration
Configuring Radio Settings on an Access Point
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
dot11 phone
Example:
Router(config)# dot11 phone
Step 4
end
Example:
Router(config-if)# end
Step 5
copy running-config startup-config
Example:
Router# copy running-config startup-config

Configuration Examples for Radio Settings on an Access Point

This section contains the following examples:
•
Configuring Radio Data Rates: Example
The following example shows how to disable the 1-Mbps data rate and set the rest of the data rates to
basic:
configure terminal
interface dot11radio 0
no speed basic-2.0 basic-5.5 basic-11.0
end
copy running-config startup-config
Configuring Radio Data Rates: Example
Configuration Examples for Radio Settings on an Access Point
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Enables IEEE 802.11 compliance phone support.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the configuration file.
27