Cisco 800 Series Manuel de conception - Page 20

Parcourez en ligne ou téléchargez le pdf Manuel de conception pour {nom_de_la_catégorie} Cisco 800 Series. Cisco 800 Series 50 pages. Fast step software design guide
Également pour Cisco 800 Series : Notes de mise à jour (36 pages), Manuel de démarrage rapide (13 pages), Manuel de démarrage rapide (17 pages), Configuration (32 pages)

CFG File Modification

NetBios Filters for LAN Traffic

When using an ISP-only configuration to a single destination, with or without the firewall filters, the

preferred configuration is to prevent NetBIOS traffic from needlessly bringing up the ISDN line. This

prevents broadcast WAN and LAN messages from wasting money. The flag syntax is as follows:

[Remote Network Interface Settings]

SetNetBiosFilterOnISP

[Local LAN Ethernet0 Settings]

SetNetBiosFilterOnE0=

If a flag value is set to 1 (default), the NetBIOS filter is enabled. The IOS access-list commands added

to the current dialer access list will be as follows:

access-list <<number>> deny udp any any eq netbios-ns

access-list <<number>> deny udp any any eq netbios-dgm

access-list <<number>> deny tcp any any eq 139

If a flag value is set to 0 or blank, the NetBIOS filter is disabled.

The Success window appears when the Service Selection feature is enabled. This window provides the

end user with the option to test the connections and to display technical support information.

The flag syntax and default parameters are as follows:

[Service Selection]

ISPSuccessText1= Your file has been successfully created.

ISPSuccessText2= Setup another router using Cisco Fast Step

ISPSuccessText3= Change the setup on this router by rerunning Cisco Fast Step Setup and

selecting the router named <<fill in name here>>

ISPSuccessText4= Setup routers for others using a Cisco Fast Step setup file (Press the

Help button for more information)

The Success window displays the text strings indicated by the ISPSuccessTextX flags, where X is line 1

through 4. (There is no on-screen help topic for this window.)

The technical support information displayed in the Technical Support window is customized by

modifying the text string for the related flag. For example, the following entry displays a telephone

number:

[TechSupportInfoDetail]

Title=

PhoneDescription1="ISP Technical Support"

Phone1=408.408.4081

Cisco 800 Fast Step Software Design Guide

2-6

Chapter 2

CFG File Development

OL-10373-02