Cisco AIR-LAP1232AG-P-K9 Fiche technique - Page 3
Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} Cisco AIR-LAP1232AG-P-K9. Cisco AIR-LAP1232AG-P-K9 8 pages. Aironet 1230ag series 802.11a/b/g access point
Imprimer la page
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Features and Benefits
Table 1 lists the features and benefits of Cisco Aironet 1230AG Series access points.
Table 1.
Features and Benefits of Cisco Aironet 1230AG Series Access Points
Feature
Dual 802.11a and 802.11g
Radios
Dual RP-TNC Antenna
Connectors for Both 2.4-GHz
and 5-GHz Radios
Link-Role Flexibility
Cisco Unified IDS/IPS
Management Frame
Protection
Security
Currently Supports 12 Non-
Overlapping Channels, with
Potentially up to 23 Channels
Rugged Metal Housing
UL 2043 Plenum Rating and
Extended Operating
Temperature
Multipurpose and Lockable
Mounting Bracket
Both Local and Inline Power
Support
Hardware-Assisted AES
Encryption
Benefit
Provides up to 108 Mbps of capacity in a single device for industry-leading capacity
and compatibility with older 802.11b clients.
Antenna connectors support a variety of Cisco 2.4-GHz and 5-GHz antennas,
providing range and coverage versatility.
Autonomous access points can function as an access point or bridge, whether set up
as a single-band or dual-band platform, allowing each radio to be individually
configured as an access point repeater, root bridge, non-root bridge, or workgroup
bridge, enabling a broad array of applications.
This integrated software feature is part of the Cisco Self-Defending Network and is
the industry's first integrated wired and wireless security solution. When a trusted
client acts maliciously, the wired IDS detects the attack and sends shun requests to
Cisco WLAN controllers, which will then disassociate the client device.
This feature provides for the authentication of 802.11 management frames by the
wireless network infrastructure. This allows the network to detect spoofed frames
from access points or malicious users impersonating infrastructure access points. If
an access point detects a malicious attack, an incident will be generated by the
access points and reports will be gathered on the Cisco wireless LAN controller,
Cisco WCS, or CiscoWorks WLSE.
Authentication
Security Standards
● WPA
● WPA2 (802.11i)
● Cisco TKIP
● Cisco message integrity check (MIC)
● IEEE 802.11 WEP keys of 40 bits and 128 bits
802.1X EAP types:
● EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
● Protected EAP-Generic Token Card (PEAP-GTC)
● PEAP-Microsoft Challenge Authentication Protocol Version 2 (PEAP-MSCHAP)
● EAP-Transport Layer Security (EAP-TLS)
● EAP-Tunneled TLS (EAP-TTLS)
● EAP-Subscriber Identity Module (EAP-SIM)
● Cisco LEAP
Encryption:
● AES-CCMP encryption (WPA2)
● TKIP (WPA)
● Cisco TKIP
● WPA TKIP
● IEEE 802.11 WEP keys of 40 bits and 128 bits
Lower potential interference with neighboring access points simplifies deployment.
Fewer transmission errors deliver greater throughput.
Cast aluminum case and rugged features support deployment in factories,
warehouses, the outdoors (in a NEMA enclosure), and other industrial environments.
Supports installation in environmental air spaces such as areas above suspended
ceilings.
Provides greater flexibility in installation options for site specific options, as well as
theft deterrence.
Power can be supplied using the Ethernet cable, eliminating the need for costly
electrical power line runs to remotely installed access points. The access points can
be powered by Cisco inline power switches, single port power injectors, or local
power.
Provides high security without performance degradation.
Data Sheet
Page 3 of 8