Cisco aironet 1130 Manuel de configuration - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Cisco aironet 1130. Cisco aironet 1130 40 pages. Wlc (wireless lan controller), wism (wireless services module) integrated wlc with aps

Imprimer la page

Section 1: SVP

Installing Software

10. Add the

11. Allow a few minutes for the download to complete.

12. Reboot the Controller

Controller Setup

PN: 1725-36192-001_H

Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs

1. Make sure that the correct version of software, listed in the Product

Summary, is installed on the controller. From the main menu, click

Monitor.

2. In the navigation pane, click

shows the current software version.

Version

3. Download the appropriate software for your model of controller from

the Cisco website

4. Set up a Trivial File Transfer Protocol (TFTP) server running on a PC

to download the file to the controller.

5. Connect to the controller via a Web browser.

6. From the main menu, click

7. In the navigation pane, click

8. For

, select

File Type

9. For

, type in the IP Address of the TFTP server.

TFTP Server

File Path

and not the system path where the TFTP server is located) and

of the firmware file to download.

Name

(Note the example simply uses the /designator for the root TFTP

directory.) Point the TFTP server to the code.

The initial setup of the controller is shown below.

. The heading labeled

Summary

Commands

Download File

Code

(this is the path in the TFTP server's root directory

Software

File