Cisco Aironet 1240AG Series Manuel de démarrage rapide - Page 37
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco Aironet 1240AG Series. Cisco Aironet 1240AG Series 49 pages. 802.11a/b/g access point
Également pour Cisco Aironet 1240AG Series : Fiche technique (10 pages)
Imprimer la page
Understanding Express Security Settings
When the access point configuration is set to factory defaults, the first SSID
that you create by using the Express Security page overwrites the default
SSID, which has no security settings. The SSIDs that you create appear in the
SSID table at the bottom of the page. You can create up to 16 SSIDs on the
access point.
Using VLANs
If you use VLANs on your wireless LAN and assign SSIDs to VLANs, you
can create multiple SSIDs by using any of the four security settings on the
Express Security page. However, if you do not use VLANs on your wireless
LAN, the security options that you can assign to SSIDs are limited because
of the limited Express Security page encryption options. Without VLANs,
encryption settings (WEP and ciphers) apply to an interface, such as the
radio, and you cannot use more than one encryption setting on an interface.
For example, when you create an SSID with static WEP with VLANs
disabled, you cannot create additional SSIDs with WPA authentication
because they use different encryption settings. If you find that the security
setting for an SSID conflicts with another SSID, you can delete one or more
SSIDs to eliminate the conflict.
If any VLANs are defined on the access point, the trunk port on the switch
must be limited to allow only the VLANs defined on the access point.
37
Quick Start Guide Cisco Aironet 1240AG Series Access Point