DigitaLinx DL-SE3H1V-C Manuel d'installation rapide - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} DigitaLinx DL-SE3H1V-C. DigitaLinx DL-SE3H1V-C 8 pages.
Imprimer la page1. Verify all components included are present before installation.
2. Connect HDMI source devices to HDMI inputs on transmitter and receiver
3. Connect a VGA and audio source to VGA input and audio input on transmitter
4. Connect an HDMI display device to the HDMI output port on receiver
5. Connect Category 6 or greater twisted pair cable with RJ45 connectors between
the DL-SE3H1V-C transmitter and the receiver. TIA/EIA-568B straight-through
wiring connections must be used with this extender set.
Note: The HDBaseT transmitter supports up to 70m / 230' for 1080p applications
and 40m / 130' for 4K applications
6. Connect AUDIO OUTPUT port on receiver to audio amplifier or powered speakers
(optional)
7. Connect RS232 control port to displays RS232 control port for serial control
(optional)
8. Connect RELAY 1 and 2 ports to projector screen or window shade control
(optional)
9. Connect LAN port to control LAN for telnet system control (optional)
Note: A complete list of command sets are located on the DL-SE3H1V-C product
page online at www.libav.com
10. Connect the included power supply to the receiver and lock the power supply to
the power connector by twisting the locking collar clockwise.
Note: The DL-SE3H1V-C only supports one way PoH, when powering receiver you
can also power the transmitter via HDBaseT. The transmitter cannot supply power
to the receiver via HDBaseT when transmitter is powered by power supply.
11. Power on attached audio / video and control devices
Connectivity Instructions