Epson VS410 Installation rapide

Parcourez en ligne ou téléchargez le pdf Installation rapide pour {nom_de_la_catégorie} Epson VS410. Epson VS410 4 pages. Multimedia projector
Également pour Epson VS410 : Déclaration de conformité (4 pages), Manuel de référence rapide (4 pages)

Imprimer la page

VS350W/VS410

Quick Setup

Before using the projector, make sure you read the safety instructions in the

online User's Guide.

Connect the projector

Choose from the following connections. See the sections below or the online

User's Guide for details.

Computer

USB Port

Connect the square end of a USB cable to the projector's

(square) port. Connect the flat end of the cable to any USB port on your

computer.

Windows

2000 SP4 or later: After turning on the projector, follow

the on-screen instructions to install the Epson USB Display software

(EMP_UDSE.EXE; only on first connection).

Note: If the software screen does not display automatically, open My

Computer or Computer, then double-click EPSON_PJ_UD.

Mac OS

X 10.5.1 or higher: After turning on the projector, the setup folder

for USB Display appears in the Finder. Double-click USB Display Installer and

follow the on-screen instructions to install the Epson USB Display software

(only on first connection).

Monitor Port

Connect one end of a VGA cable to the projector's Computer port, and the

other end to your computer's

switch it to external display (see "Troubleshooting"). You can also connect an

audio cable.

Video Device

Connect up to 3 video devices and use the remote control to switch

between them.

*412125900*

VGA cable

USB cable

USB TypeB

monitor port. If you are using a laptop,

S-Video cable

Component video to VGA cable

Audio cable

RCA video cable (composite video)

Turn on your equipment

Turn on your computer or video source.

Plug in the projector. The power light on the projector turns orange.

Open the A/V Mute slide all the way.

Press the

power button on the projector or remote control. The

projector beeps, the power light flashes green, and then stays on.

Note: To shut down the projector, press the

unplug it. You don't have to wait for the projector to cool down.

The default language of the menu system is English. To select another

language, press the Menu button on the remote control. Select

Extended and press Enter. Select Language and press Enter. Select

your language and press Enter. Press the Menu button to exit the menu

system.

Adjust the image

If you don't see an image, press the Source Search button on the

projector or remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see the

troubleshooting tips on the right.

To raise the image, press the foot release button and lift the front of the

projector. Release the button to lock the foot in position.

Turn the zoom ring to reduce or enlarge the image.

power button twice, then