DigitaLinx DL-VHD Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DigitaLinx DL-VHD. DigitaLinx DL-VHD 4 pages.

•

Verify all components included with the DL-VHD are present before installation.

•

Connect a laptop to VGA IN and AUDIO IN ports via VGA and audio cables.

•

Connect a display device to HDMI OUT port via an HDMI cable.

•

Use the included USB to Micro-USB cable to connect the laptop to DC 5V port to

apply power.

•

Power on attached audio/video devices.

Symptom

• No power

• No signal

• Video without audio

Important notice:

•

Do not attempt to disassemble or alter the extender housing. There are no

user-serviceable parts inside the unit. Doing so will void your warranty.

•

To minimize the possibility of equipment damage from electrostatic discharge

(ESD), all source and destination equipment must be powered off during installation.

•

Do not connect the extender to a telecommunication outlet wired to unrelated

equipment. Doing so may damage the unit or any connected equipment.

•

Allow proper ventilation to reduce the risk of thermal failure.

Instructions

Troubleshooting Tips

Possible Solutions

• Verify the power supply is connected to an active outlet.

• Disconnect VGA cable from source. Wait 30 seconds for

operating system to reset to normal operation. Reconnect

VGA cable to source.

• Drop the HDMI signal to the next lower resolution; i.e.,

decrease resolution from 1080p to 720p, etc.

• Test with a second HDMI cable.

• Check the audio level from the source device.

• Verify the audio cable is in working order and is securely

installed on the source device and converter.