DigitaLinx DL-1H1V1U-WP-W Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} DigitaLinx DL-1H1V1U-WP-W. DigitaLinx DL-1H1V1U-WP-W 19 pages.

The DigitaLinx DL-1H1V1U-WP-W is a 2x1 auto switching HDBaseT 2.0 transmitter that supports the long distance
transport of HDMI, VGA and High Speed USB 2.0 signals up to 100 meters / 330' using category cabling. The DL-
1H1V1U-WP-W is 4K compatible with a max resolution of 4K@60Hz / 4:2:0 8bit deep color. An additional analog
audio pass through input is located on the wall plate that allows for audio distribution to the HDBaseT receiver
side. With 48V integrated PoH, the DL-1H1V1U-WP-W can be powered via HDBaseT receiver with a PSE module
or the wall plate can be powered by a local power supply.
The DL-1H1V1U-WP-W gives you the ability to automate the display power ON by using pre-loaded RS232
commands whenever a video signal is introduced to the system using either the HDMI or VGA input. It will also
turn the display power OFF after a specified amount of time has passed when no video signal is present. It also
gives you the ability to turn the display ON or OFF as well and switch from one input to another manually from
the transmitter face plate.
The DL-1H1V1U-WP-W is ideal for situations where USB must be extended alongside HDMI or VGA for display
interactivity for items such as interactive whiteboards or projectors.
For a complete list of programming commands to automate display power status, please see the complete
owners manual online at www.libav.com or by using the QR code on the print page of this guide.
NOTE: The DL-1H1V1U-WP-W HDBaseT transmitter must be used with the DL-HD2-RX HDBaseT 2.0 receiver
(sold separately) to complete the circuit.
• DL-1H1V1U-WP-W HDBaseT Wall Plate Transmitter
• (1) Quick Install Guide
• (1) 2 pin Phoenix Male Connector
• (1) 2 gang Decora wall plate cover
• (1) 2m / 6' USB A to A Cable

Product Overview

Package Contents

DL-1H1V1U-WP-W Owners Manual
5