DigitaLinx DL-2H1V1U-WP-W Manuel d'installation rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} DigitaLinx DL-2H1V1U-WP-W. DigitaLinx DL-2H1V1U-WP-W 8 pages.

Imprimer la page

DL-2H1V1U-WP-W Quick Guide

Connectivity Instructions

1. Verify all components included with the extender set are present before installation.

2. Turn off power and disconnect the audio/video equipment by following the manufacturer's

instructions.

3. Connect Category 6 or greater twisted pair cable with RJ45 connectors between the transmitter

(DL-2H1V1U-WP-W) and the receiver (DL-HD2-RX or DL-HD2A-RX, sold separately) HDBaseT ports .TIA/

EIA-568B straight-through wiring connections must be used with all HDBaseT extenders.

4. Connect an HDMI cable between the AV source and the transmitter (DL-2H1V1U-WP-W).

5. Connect a USB A TO B cable (provided) between a USB host peripheral and the transmitter

(DL-2H1V1U-WP-W).

6. Connect the power supply adapter to the receiver (DL-HD2-RX/DL-HD2A-RX, sold separately) to

power the DL-2H1V1U-WP-W using HDBaseT or connect a 12V power supply to the 2 port phoenix

power input of the DL-2H1V1U-WP-W to power locally.

7. Power on attached audio/video and USB devices.