Epson 4000 - Stylus Pro Color Inkjet Printer Bulletin d'information sur les produits - Page 3

Parcourez en ligne ou téléchargez le pdf Bulletin d'information sur les produits pour {nom_de_la_catégorie} Epson 4000 - Stylus Pro Color Inkjet Printer. Epson 4000 - Stylus Pro Color Inkjet Printer 17 pages. Print engine
Également pour Epson 4000 - Stylus Pro Color Inkjet Printer : Brochure & Specs (4 pages), Manuel de référence du produit (38 pages), Informations sur le produit (13 pages), Commencer ici Manuel (6 pages), Important Information (2 pages), Garantie limitée (12 pages), Manuel de référence rapide (11 pages), Brochure & Specs (12 pages), Brochure & Specs (6 pages), Manuel de configuration (16 pages)

Note:

With the Auto Center option selection, if your image size is larger then the actual printable area

supported by the printer hardware some clipping may still occur in the image length, approximately

1/16 of an inch. The printer always has a fixed bottom margin of .56 inches. If you are printing an

8x10 image on an 8.5x11 page auto centering will clip part of the image lengthwise in order to center

the image top to bottom. To avoid clipping the image you must select Manual Position under Image

Offset and also uncheck auto centering option under your application and set the margins manually.

You may have to set the top margin in your application to .25" to get the full 8x10 image to print.

6. Now you are ready to send the job from your application or drag and drop into the hot folder.

PC Windows XP/2000 Instructions

No updated software is required to correct the image clipping issue under Windows XP/2000. However the

following changes have to be made.

1. Setup your print jobs as normal from your applications. Select ColorBurst as your printer driver.

Select the page size that you want to print on. This can be a predefined page size or a custom page

size.

2. Launch the ColorBurst Rip on the server computer. Once the ColorBurst Rip windows is up and

running go to Options menu then select Printer Options.

3. Under Page Setup select User page dimensions option and enter the page width and height

dimensions.

4. Select Position upper left corner of job option. This option does not center the image, but it will

allow to print the full image without clipping. Click on OK to close the window.