ACU-RITE 01301CCDI Manuel d'instruction - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} ACU-RITE 01301CCDI. ACU-RITE 01301CCDI 20 pages. Professional weather center

Imprimer la page

Troubleshooting

Problem

Inaccurate

temperature or

humidity

Inaccurate wind

readings

Display screen

not working

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

• Make sure both the display unit and 3-in-1 sensor are

placed away from any heat sources or vents (see page 9).

• Make sure both units are positioned away from moisture

sources (see page 9).

• Make sure 3-in-1 sensor is mounted at least 5 ft off of

the ground.

• Calibrate indoor and outdoor temperature and humidity

(see page 15).

• What is wind reading being compared to? Pro weather

stations are typically mounted at 30 ft high or more. Make

sure to compare data using a sensor positioned at the

same mounting height.

• Check location of the sensor. Ensure it's mounted a

minimum of 5 ft in the air with no obstructions around it

(within several feet).

•Ensure wind cups are spinning freely. If they hesitate or stop

try lubricating with graphite powder or spray lubricant.

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

• Reset the display by pressing and HOLDING the

"CLEAR RECORD/RESET" button, located on the

back of the display unit in the battery compartment.

Date and time will need to be entered after a reset.

Possible Solution