Epson AcuLasaer C1900 Manuel de référence rapide - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de référence rapide pour {nom_de_la_catégorie} Epson AcuLasaer C1900. Epson AcuLasaer C1900 17 pages.

Imprimer la page
Worn Fuser
This message indicates that the fuser unit is
near the end of its service life. Turn the
printer off, then replace the fuser unit with a
new one. Contact your dealer.
To clear this warning message and continue
printing, select Clear Warning from the
control panel's Reset Menu. See "How to
access the control panel menus" for
instructions.
Worn Photoconductor
This message indicates that the
photoconductor unit is near the end of its
service life. You can continue to print until
the Replace Photocondctr error message
appears, but early replacement is
recommended to maintain high print
quality.
To clear this warning message and continue
printing, select Clear All Warnings from
the control panel's Reset Menu. See "How to
access the control panel menus" for
instructions.
Worn Transfer Unit
This message warns you that the transfer
unit is near the end of its service life. You can
continue to print until the Replace
TransferUnit error message appears, but
early replacement is recommended to
maintain high print quality.
Write Error ROM A/Write Error ROM P
This message indicates an internal error in
the printer. Reset the printer. If this error
persists, consult your dealer.
Writing ROM A/Writing ROM P
This message indicates that a ROM module
in slot A or P is being written. Please wait
until this message disappears.
EPSON AcuLaser C1900 Quick Reference
XXXX Toner Low
The indicated developer cartridges have
little toner remaining. (The letters C, M, Y, or
K appear in place of XXXX and indicate the
colors Cyan, Magenta, Yellow, and Black
respectively.)
You can continue to print until the Replace
Toner XXXX error message appears. Waiting
until this message appears before replacing
the toner is recommended as toner may spill
during replacement if toner remains in the
cartridge. When printouts become faint, see
"Developer Cartridge" in the Reference Guide
for instructions.
To clear this error, select Clear Warning
from the control panel's Reset Menu. See
"How to access the control panel menus" for
instructions.
XXXX Toner Cart Out
One or more developer cartridges are not
installed in the printer.
Install the cartridges. See "Developer
Cartridge" in the Reference Guide for
instructions.
Status and Error Messages (7/7)