ARGENTO Piuma-S Manuel de l'utilisateur - Page 12
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} ARGENTO Piuma-S. ARGENTO Piuma-S 20 pages. Epac bicycle, electric pedal-assisted cycle
1
1
2
2
6. ASSEMBLY
6.1 Piuma-S model assembly
1. Carefully remove the bike from the packaging,
then remove all the protective material, being
careful not to scratch the painted parts and not to
pull the bike cables. The removal of the bike from
the packaging must be carried out by two adults, in
order not to incur injuries or crushing.
2. Open the frame, then close the handle on the
frame indicated by the number 1 on the right
picture, then close the handle on the frame
indicated by the number 2 on the right picture.
3. Open the handlebar stem in its correct vertical
position, being careful when tightening the
handlebar stem through its own locking device.
4. Insert the seat post into the bike, making sure to
orient the seat and tighten the seat post correctly
with the appropriate device on the frame as shown
in the photo on the right. Do not raise the seat
post beyond the limit of 15 cm to avoid breaking
the frame and serious injuries while riding.
5. Identify the right pedal through the R mark placed
on the pedal axis, while the L mark identifies the left
pedal.
Tighten the left pedal anticlockwise and the right
pedal clockwise, in their respective positions to
avoid serious injuries while using the bike and
damaging the bike.
MAKE SURE ALL BOLTS AND PEDALS ARE
TIGHT