Epson AcuLaser CX11N Manuel de l'utilisateur - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson AcuLaser CX11N. Epson AcuLaser CX11N 17 pages. Multi-function colour laser printers
Également pour Epson AcuLaser CX11N : Opération de base Gude (26 pages), Spécifications (4 pages), Manuel de configuration (32 pages), Commencer ici Manuel (8 pages), Manuel complémentaire (6 pages), Mise à jour (1 pages), Bulletin d'information sur les produits (5 pages), Spécifications (4 pages)

Epson AcuLaser CX11N/CX11NF

Removing and Replacing a Toner

Cartridge

1. Make sure the CX11N is turned on.

2. Check the color of the low or empty toner cartridge in the

LCD screen, then open cover A.

3. Push up the lock lever on the right to unlock the toner

cartridge.

4. Pull out the toner cartridge.

5. Remove the new toner cartridge from its package and gently

shake it as shown below.

Epson AcuLaser CX11N/CX11NF

Warning:

Do not touch the toner. Keep the toner away from your eyes. If

toner gets on your skin or clothes, wash it off with soap and

water immediately.

6. Hold the tag and gently pull the toner seal upward and

remove it.

7. Insert the toner cartridge with the arrow mark facing you.

Push it all the way into its slot, pushing on both sides

evenly, until it stops securely.

8. Push down the right lever to lock the toner cartridge.

Note:

The toner cartridge is installed securely when the lock lever is at

the lock position.

9. Close cover A.

10. Check for toner messages on the LCD screen. If another

toner cartridge needs to be replaced, you see another error

message. Repeat steps 2 to 9 to replace the other cartridges.

8/05