Cisco ASA 5508-X Manuel d'installation du matériel - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation du matériel pour {nom_de_la_catégorie} Cisco ASA 5508-X. Cisco ASA 5508-X 32 pages. Threat defense reimage guide
Également pour Cisco ASA 5508-X : Manuel de démarrage rapide (8 pages), Manuel d'installation facile (11 pages), Manuel de démarrage rapide (9 pages), Manuel du logiciel (37 pages), Monter et connecter (6 pages), Manuel (14 pages)

Overview

LED

Status

Active

SSD

Network Port Status

On the rear panel, a pair of LEDs (Link status and connection Status) for each of the eight Gigabit Ethernet

network ports, and the Gigabit Ethernet Management port.

Link status (L):

• Unlit – No link, or port is not in use.

• Solid green – Link established.

• Flashing green – Link activity.

Connection-speed status (S):

• One blink every three seconds – 10 Mbps.

• Two rapid blinks – 100 Mbps.

• Three rapid blinks – 1000 Mbps.

Online Only

Description

System operating status:

• Green – Normal system function.

• Amber – Critical alarm indicating one or more of the following:

• Major failure of a hardware or software component.

• Over-temperature condition.

• Power voltage outside the tolerance range.

Status of the failover pair:

• Solid green – Failover pair operating normally.

• Unlit – Failover is not operational.

SSD LED behavior at first customer ship:

• Unlit – No SSD present.

• Green – SSD installed.

SSD LED behavior after June 2017:

• Unlit – No SSD present or no activity on the SSD.

• Green – Activity on the SSD.

Note

See

Replace the SSD , on page 27

SSD.

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide

for information on replacing a failed

LEDs