Caberg Just SpeakS Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Caberg Just SpeakS. Caberg Just SpeakS 14 pages. Bluetooth headset & intercom for scooters and motorcycles

Imprimer la page

JUST SPEAK S

GPS Pairing as Mobile Phone

If GPS is not only used for turn-by-turn voice instructions but also is your

preferred Bluetooth stereo music source, you can pair the GPS to the Just

Speak S by following the simple procedures in "Mobile Phone Pairing".

When you do this, the Just Speak S thinks the GPS is a mobile phone. But

the Just Speak S can directly pair an additional mobile phone.

Note:

You have to use a motorcycle specific GPS which transmits turn-by-turn voice

instruction to the headset by Bluetooth. Most automotive GPS systems don't

have this feature.

GPS Navigation

Mobile Phone

Multipoint

Pairing

HFP

A2DP

JUST SPEAK S

GPS Pairing as Mobile Phone

Mobile Phone Call Making and Answering

1. When you have an incoming call, simply press the (+) Button to answer the

call.

2. You can also answer the incoming call by loudly speaking any word

of your choice if Voice Activated Phone Answering, VOX phone is

enabled. (Refer to "Enabling/Disabling Voice Activated Phone Answering" for

details.)

3. To end a call, press and hold the (+) Button for 2 seconds until you hear

a mid-tone single beep, or wait for the called person to end the call.

4. To reject a call, press and hold the (-) Button for 2 seconds until you hear

a beep while the phone is ringing.

5. There are several ways to make a phone call:

• Enter numbers on your mobile phone keypad and make a call. Then

the call is automatically transferred to the headset.

• Press and hold the (+) Button for 3 seconds in stand-by mode until

you hear a high tone single beep to activate the voice dialing of your

mobile phone. For this, the voice dialing feature must be available

on the mobile phone. Refer to your mobile phone manual for further

instruction.

• To redial the last number, press and hold the (-) Button for 3 seconds

in stand-by mode until you hear a high tone single beep. You will hear

a voice prompt saying "Last number redial".

JUST SPEAK S

Note:

1. If you are using multipoint mobile phone connection and you have an incoming

call from the second phone during the call of the first phone, then you may still

receive the call from second phone. In this case, the call from the first phone is

on waiting mode. If you end a call, then it will automatically guide you to the first

phone call.

2. If you are using multipoint connection of mobile phone and GPS, you may not

listen to the GPS voice instruction during the phone call.

Stereo Music

You can listen to stereo music by Bluetooth wireless stereo. The Bluetooth

audio device must be paired with the Just Speak S by following the

"Bluetooth Stereo Device Pairing" instructions. The Just Speak S supports

the Audio/Video Remote Control Profile (AVRCP), so if your Bluetooth audio

device also supports the AVRCP, you can use the Just Speak S to remotely

control music playback. So, you can not only adjust the volume but also

use the functions such as play, pause, track forward and track backward.

• To adjust the volume, press the (+) Button or the (-) Button.

• To play or pause music, press and hold the (+) Button for 1 second until

you hear a double beep.

• To track forward or track back, press and hold the (+) Button or the (-)

Button for 2 seconds until you hear a double beep.