Cisco Catalyst IW9165E Manuel de démarrage rapide - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Cisco Catalyst IW9165E. Cisco Catalyst IW9165E 16 pages.

Imprimer la page
Mounting the DIN Rail Bracket on the Access Point
Mounting the DIN Rail Bracket on the Access Point
Step 1
First, attach the DIN rail bracket to the back of the access point. The DIN rail bracket can be attached to the bottom or
the back of the access point. For back mounting, there are two ways to attach the bracket.
Step 2
Attach the DIN mounting bracket to the access point using the two screws provided in the kit. Position the bracket over
the two mounting holes that correspond to your orientation. Use 12-15 in-lbs. of torque to screw the bracket onto the
access point.
Figure 5: Attaching the DIN Rail Bracket
1
2
3
Step 3
Once the bracket is attached to the access point, it can be mounted onto the DIN Rail.
Installation Overview
6
DIN mounting bracket
M4 screws from kit
Mounting holes
Installation Overview