Cisco Linksys WET610N Manuel d'installation rapide - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Cisco Linksys WET610N. Cisco Linksys WET610N 49 pages. 802.11ac
Également pour Cisco Linksys WET610N : Manuel d'installation rapide (12 pages), Manuel d'installation rapide (20 pages), Manuel de l'utilisateur (17 pages), Configuration (3 pages)
Imprimer la page
Chapter 3
Default Gateway
Enter the IP address of the default
gateway for your network (in most cases, this is your
router).
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Management
Use this screen to manage specific Bridge functions: access
to the web-based utility, backup of the configuration file,
and reboot.
Administration > Management
Management
Bridge Access
Use a password to protect access to the web-based
utility.
Password
Enter a new Password for the Bridge.
Re-enter to confirm
Enter the Password again to confirm.
Idle Timeout
The login times out after a period of
inactivity that you specify. The range is 60 to 3600 seconds.
The default is 600.
Web Access
Web Utility Access via Wireless
Bridge in a public domain where you are giving wireless
access to your guests, you can disable wireless access to
the Bridge's web-based utility. You will only be able to
access the web-based utility via a wired connection if you
disable the setting. Keep the default, Enabled, to allow
wireless access to the Bridge's web-based utility, or select
Disabled to block wireless access to the utility.
Backup and Restore
Backup
To back up the Bridge's configuration file, click
Backup Configurations. Then follow the on-screen
instructions.
Wireless-N Ethernet Bridge with Dual-Band
If you are using the
Advanced Configuration
Restore
Click Browse and select the configuration file.
Then click Restore Configurations.
System Reboot
Reboot
To reboot or restart the Bridge, click Start to
Reboot.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Factory Defaults
Use this screen to restore the Bridge's configuration to its
factory default settings.
Factory Defaults
Restore All Settings
To reset the Bridge's settings to the
factory defaults, click Restore All Settings. Any settings
you have saved will be lost when the default settings are
restored.
Administration > Factory Defaults
Administration > Upgrade Firmware
Use this screen to upgrade the Bridge's firmware. Do
not upgrade the firmware unless you are experiencing
problems with the Bridge or the new firmware has a
feature you want to use.
Administration > Upgrade Firmware
Before upgrading the firmware, download the Bridge's
firmware upgrade file from the Linksys website,
www.linksys.com.
10