Cisco Meraki GR60 Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Cisco Meraki GR60. Cisco Meraki GR60 14 pages. Dual-band enterprise class 802.11ac cloud-managed access point

Imprimer la page

a. The Power LED should be solid green (or blue, if clients are connected). If it is

ﬂashing blue, the ﬁrmware is automatically upgrading and the LED should turn

green when the upgrade is completed (normally within a few minutes). See

the

"LED

b. Note: Your GR60 must have an active route to the Internet to check and

upgrade its ﬁrmware.

2. Verify access point connectivity

a. Use any 802.11 client device to connect to the GR60 and verify proper

connectivity using the client's web browser.

3. Check network coverage

4. Conﬁrm that you have good signal strength throughout your coverage area. You can

use the signal strength meter on a laptop, smart phone, or other wireless device.

Troubleshooting

Reference the

MR Product Page

Regulatory

This equipment is for indoor use only and the PoE device is considered unlikely to connect to

an Ethernet network with outside plant routing, including campus environments.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

FCC Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

Indicators" section for more details. .

for additional information and troubleshooting tips.