Epson C11CA50202 Manuel d'installation du réseau - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'installation du réseau pour {nom_de_la_catégorie} Epson C11CA50202. Epson C11CA50202 36 pages. Epson artisan 710: install guide
Imprimer la page
10. Press
OK
11. Continue with the next section.
Choose Security Settings
1. Press u or d to select the security mode you want to use for the Ad Hoc
wireless network, then press
Note:
If you don't want to enable security for your Ad Hoc network, select None, then
press OK.
2. Do one of the following:
■
If you selected
Settings and Connect to the Network" on page 22.
■
If you selected WEP as the security mode, continue with step 3.
3. Create a WEP key for the Ad Hoc network. The WEP key can be in
alphanumeric (ASCII) format (recommended) or hexadecimal format.
Note:
An alphanumeric WEP key must be 5 or 13 characters. A hexadecimal WEP key
must be 10 or 26 characters.
4. Press u or d to select
Hexadecimal
20
Wireless Network Installation
to select the default channel for your Ad Hoc network.
as the security mode, continue with "Confirm Your
None
Alphanumeric
if your WEP key is in hexadecimal format.
.
OK
if your WEP key is ASCII, or select