Argo ADICS13DC Manuel d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Argo ADICS13DC. Argo ADICS13DC 17 pages. Split air conditioner system
Également pour Argo ADICS13DC : Manuel d'utilisation (15 pages), Manuel d'instructions d'installation (19 pages)
Imprimer la pageEN
Press "ON/OFF" to go back to main screen:
Par.
Parameter name
P00
Factory default reset
P01
Software version
P03
Carrier frequency
infrared signal
P05
Temperature scale
P06
Transmission channel
P08
Communication address/
refrigerant circuit
P12
ECO mode power input limit
P13
Room Air Temperature hea-
ting shift
NOTE
Parameters not listed in the table are reserved and should not be changed. Changing the parameters not listed can cause the
air conditioner to malfunction.
Min
Default
Max
0
0
3
0
-
7
0
0
1
0
0
1
0
0
3
0
0
8
30
75
99
0
3
10
10
(0.5 sec)
Values
0 = No action
1 = Reset all remote control parameters to facto-
ry default value
2 = Reset all unit parameters to factory default
value
Software version of the remote controller
0 = 33 kHz
1 = 38 kHz
0 = °C (Celsius)
1 = °F (Fahrenheit)
0 = Channel #0
1 = Channel #1
2 = Channel #2
3 = Channel #3
See installation manual. Do not modify during
operation.
When ECO mode is selected, max electrical
power input of the unit is limited to P12:
30 = 30% of Max Power Input
31 = 31% of Max Power Input
...
99 = 99% of Max Power Input
0 = 0°C
1 = 1°C
...
10 = 10°C
This parameter can be modifi ed according to the
stratifi cation of the air during heating operation