Epson CX3810 - Stylus Color Inkjet Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Epson CX3810 - Stylus Color Inkjet. Epson CX3810 - Stylus Color Inkjet 9 pages. Epson scan icm updater v1.20 (psb.2008.07.001)
Également pour Epson CX3810 - Stylus Color Inkjet : Spécifications (2 pages), Manuel rapide (36 pages), Fiche technique (6 pages), Commencer ici Manuel (8 pages), Mise à jour (1 pages)

Imprimer la page

Epson CX3810 - Stylus Color Inkjet Manuel de l'utilisateur

Epson Stylus CX3800 Series

5. Open the cartridge cover and squeeze the tab at the back of

the empty/low cartridge and lift it straight out. Dispose of it

carefully. Do not take the used cartridge apart or try to refill

it.

WARNING:

If ink gets on your hands, wash them thoroughly with soap and

water. If ink gets into your eyes, flush them immediately with

water.

6. Before you open the new ink cartridge package, shake it

four or five times. Then remove it from the package.

Caution:

Do not remove or tear the label on the

cartridge; otherwise, ink will leak.

Do not touch the green chip on the side of

the cartridge. This can damage the ink

cartridge.

7. Place the new ink cartridge into the cartridge holder and

push it down until it clicks into place.

8. Replace any other cartridges that need to be replaced.

Epson Stylus CX3800 Series

8 -

9. Close the ink cartridge cover and press it until it clicks into

place.

10. Close the scanner.

11. Press the

ink button. The Epson Stylus CX begins

charging ink and the P

about one minute. When it's finished, the P

flashing and remains on, and the

Caution:

Never turn off the Epson Stylus CX while the P On light is

flashing or you'll waste ink.

Note:

If the

ink light stays on (not flashing), the ink cartridge may not

be installed correctly. Press the

the ink cartridge until it clicks into place.

Epson CX3810 - Stylus Color Inkjet Manuel de l'utilisateur - Page 8

Related Documentation