CABINETS TO GO Findley & Myers BC36 Instructions de montage - Page 4
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} CABINETS TO GO Findley & Myers BC36. CABINETS TO GO Findley & Myers BC36 5 pages. Base cabinets
Également pour CABINETS TO GO Findley & Myers BC36 : Manuel d'instructions de montage (9 pages)
Imprimer la page
6.
Install the Drawer Slide Rails: Insert the drawer side rail's back end (h) into the
holder (g) previously installed (Step 4) on the back panel (D) (Figure 8).
Then secure the drawer rail front end with 1/2" screws (e) using the pre‐drilled holes in the
face frame (A). The remainder of the screws can be used to secure the drawer to the rails.
h
e
4 - 2 Sets
16
Qty
Qty
7.
Drawer Assembly (Figure 9): First assemble the drawer front (G) with drawer box front (H)
with screws (f). Then assemble the rest of the parts of the drawer box (H) using your palm, or a rubber
mallet if needed, to secure the dove tails into position. Repeat step for 2nd drawer.
f
t
10
Q
y 6-
Figure 9
8.
Installing the Corner Braces (Figure 10) and inserting the Drawer: Place the corner
braces (b) on each top corner of the cabinet and secure them with the ½" Corner Brace Screws (c).
Slide the drawer into the rails and check the drawer position. Install the rubber bumpers (a) onto
the corners of the door and drawer front (G) where they contact the frame.
b
c
Q ty
4
8
Qty
a
12
Qty
D
B
F
Figure 8
G
Figure 10
h
H
b
Page 4
Top
g