CABINETS TO GO Findley & Myers CB36 Instructions de montage - Page 2
Parcourez en ligne ou téléchargez le pdf Instructions de montage pour {nom_de_la_catégorie} CABINETS TO GO Findley & Myers CB36. CABINETS TO GO Findley & Myers CB36 5 pages. Lazy susan cabinets
Également pour CABINETS TO GO Findley & Myers CB36 : Manuel d'instructions de montage (9 pages)
Imprimer la page
► General Instructions:
Thank you for purchasing a Cabinets To Go product. You are now the proud owner of a high quality product designed
to face the test of daily use and guaranteeing your enjoyment for many years to come.
Carefully read the instructions before starting the installation.
During assembly, please follow all generally accepted safety procedures.
Failure to adhere to the following instructions will invalidate the warranty and Cabinets To Go will decline any responsibility for any
damages caused. Any installation which does not correspond to the instructions may result in defects, malfunctioning parts, significant
damage and/or injury.
Before the assembly begins, check that all appropriate and required plumbing and electrical connections exist.
Before drilling, make absolutely sure that there are no pipes (gas, water,electricity, heating, etc.) at the drilling location. Cabinets To Go will
not be held responsible for failure to follow these instructions.
PRIOR TO ASSEMBLY, PLEASE MAKE SURE YOU HAVE ONE FACE FRAME BOX AND ONE CARCASS BOX, WHICH HAVE ALL THE PARTS IN THE
QUANTITIES MENTIONED BELOW. IF YOU ARE MISSING ANY PARTS, PLEASE STOP AND CONTACT CUSTOMER CARE IMMEDIATELY AT
1-800-CABINET.
Items Quantity:
►
Item
Description
Face Frame (A1) & Short Face Frame (A2)
A
Side Panels {Left (B1) and Right (B2)}
B
C
Left Rear Side Panel
D
Right Rear Side Panel
Bottom with Turntable
E
F
BackPanel
G
Shelf with Turntable
H
Long Toe Kick (H1) & Short Toe Kick (H2)
I
Hardware Box:
Plastic Corner Braces 5pcs, 1/2" Large Round Head Screws 16pcs, Invisible Hinge with Screws 2 sets , 1/2" Round Head Screws 10pcs,
1/2" flat head screws 12pcs, Door Hinge with screws 2 sets, round buttons 4pcs, (pre-installed magnetic latch & plate)
J
Doors (J1) & (J2)
► Required Tools:
Tools Required: Phillips Screwdriver
► Hardware Box:
a
b
c
4
5
10
Qty
Q ty
Qty
The materials listing above are for the largest unit in this instruction set. Smaller units may require less hardware and materials;
therefore, your item may contain a smaller number of each.
Optional Tools: Electric Drill
Optional Tools: Rubber Mallet
d
e
f
Qty 2
t
12
Q
y
Qty 16
Qty 2
Sets
Lazy Susan
Sets
Installation
g
Page 2
F
C
G
B1
J1
J2
E
(Behind Doors)
Qty
2
2
1
1
1
1
1
2
1
2
D
B2