Epson Stylus CX6600
Interface
Standard
Based on Universal Serial Bus
Specifications Revision 2.0, Universal
Serial Bus Device Class Definition for
Printing Devices version 1.1, Universal
Serial Bus Mass Storage Class Bulk-
Only Transport Revision 1.0
Bit rate
480 Mbps (high speed device)
12 Mbps (full speed device)
Data encoding
NRZI
Connector
USB Series B 2.0 (High Speed)
Recommended
cable length
6.6 feet (2 meters) or less
Safety Approvals
Safety standards
UL 60950, CSA C22.2 No. 60950
EMC
FCC part 15 subpart B class B
CSA C108.8 class B
Using the Security Lock
To prevent unauthorized use of your CX6600, you can
activate its security lock feature. The security lock requires you
to enter a PIN (Personal Identification Number) whenever
you turn on the CX6600. If you forget your PIN, you can still
regain access to your CX6600 by turning off the security lock;
see "Turning Off the Security Lock" for details.
Follow these steps to activate the security lock:
1. Make sure the CX6600 is connected to your computer.
Then press the P On button to turn on the CX6600.
2. Insert your Stylus CX6600 software CD-ROM in your
computer's CD-ROM or DVD drive.
®
3. Windows:
If you see the Software Installation screen,
click Exit. Open the SecurityLockTool folder on your
CD-ROM, then double-click the EPILOCE4 icon.
®
Macintosh:
The Epson folder automatically opens (if it
doesn't, double-click the Epson CD-ROM icon). Then
double-click the Security Lock icon.
You see this screen:
Epson Stylus CX6600
4 -
4. Make sure Security Lock On is selected and click OK.
5. At the confirmation screen, click OK again and close the
program by clicking Cancel. You have now enabled the
Security Lock menu on the CX6600.
6. On the control panel, press the Setup button, then use the
Select buttons to display Security Lock on the LCD
screen.
Press Setup . . .
7. Press the x Color button.
8. Press the green button next to On (shown on the LCD
screen).
9. Enter a 4-digit PIN. Be sure to write down the number so
you don't forget it.
10. Press the green button next to OK on the LCD screen.
11. Turn off your CX6600. It is now locked.
When you turn it back on, it prompts you to enter your PIN.
You cannot use it without entering the PIN unless you run the
security lock program from your computer, as described in the
next section.
Turning Off the Security Lock
Follow these steps to turn off the security lock:
1. If you just turned on your CX6600, enter your PIN.
2. On the control panel, press the Setup button, then use the
Select buttons to display Security Lock on the LCD
screen.
3. Press the x Color button.
4. Press the green button next to Off on the LCD screen.
5. Enter your 4-digit PIN.
6. Press the Copy button to exit setup.
If you forget your PIN, you can regain access to the CX6600
by running the security lock program from your computer:
1. Make sure the CX6600 is connected to your computer.
Then insert your Stylus CX6600 software CD-ROM in
your CD-ROM or DVD drive.
6/04
Then press Select
Imprimer la page