Epson CX9400Fax - Stylus Color Inkjet Manuel - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Epson CX9400Fax - Stylus Color Inkjet. Epson CX9400Fax - Stylus Color Inkjet 17 pages. Supplemental / late breaking information
Également pour Epson CX9400Fax - Stylus Color Inkjet : Commencer ici Manuel (24 pages), Commencer ici Manuel (8 pages), Spécifications (2 pages), Manuel rapide (48 pages), Commencer ici Manuel (9 pages), Mise à jour (1 pages), Supplement (1 pages)

Epson CX9400Fax - Stylus Color Inkjet Manuel
Epson Stylus CX9400Fax Series

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You
must install new cartridges immediately after removing the old
ones. Use the following part numbers when you order or
purchase new ink cartridges:
Ink color
Black
Cyan
Magenta
Yellow
Note:
We recommend that you use genuine Epson cartridges and do not
refill them. The use of other products may affect your print quality
and could result in printer damage.
Yields vary considerably based on images printed, print settings,
paper type, frequency of use, and temperature. For print quality, a
small amount of ink remains in the cartridge after the "replace
cartridge" indicator comes on. The printer ships with full cartridges
and part of the ink from the first cartridges is used for charging the
printer.
For best printing results, use up a cartridge within six months of
opening the package.
Store ink cartridges in a cool, dark place. If you bring them inside
from out in the cold, allow them to warm up to room temperature
for at least 3 hours before using them.
Caution:
Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
Leave the expended cartridge(s) installed until you have obtained a
replacement, or the ink remaining in the print head nozzles may dry
out.
1. Turn on the Epson Stylus CX9400Fax Series.
If a cartridge is low or expended,
you see a message on the display
screen. Note which cartridges
need to be replaced and press
.
OK
If you're replacing a cartridge
before you see a message on the
display screen, press the
button, select
Maintenance
and press
. Then select
OK
Change Ink Cartridge
14
Part number
69 or 68 (High Capacity)
69
69
69
Setup
,
and press
.
OK
2. Open the scanner, then open the cartridge cover.
3. Squeeze the tab on the
cartridge and lift it up.
Dispose of it carefully. Do
not take the used cartridge
apart or try to refill it.
Warning:
If ink gets on your hands, wash
them thoroughly with soap and
water. If ink gets into your eyes,
flush them immediately with
water. Keep ink cartridges out
of the reach of children.
4. Shake the cartridge several times, then remove it from the
package. Do not to touch the green chip on the side.
5. Remove the yellow tape from
the bottom of the ink cartridge.
Caution:
Do not remove any other labels or
seals, or ink will leak.
8/07