CabKing 8V1 Manuel d'instruction - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} CabKing 8V1. CabKing 8V1 20 pages.

Left hood

Pan splash

guard

Drip pan

Hand rest

1. Refer to FIG. A above for assembly instructions. Determine a suitable, well lit location

for your CabKing-8V1. You will need a sturdy table or workbench that has 4 feet

width X 2 feet depth of clear space. The CabKing-8V1 is a heavy machine that

weighs approximately 150lbs once assembled. We highly suggest assembling this

machine with two people.

2. There are three boxes that contain components of your machine; the motor box, the

baseboard, hood, pan, light, and accessory box, and the box that contains the wheels.

Do not throw away any packaging until you are completely set-up.

3. Open the box that contains the baseboard and accessories. Remove all loose foam

and accessories. Check to make sure all parts are present both on the machine and

in the accessory box according to the parts listed on the opposite page. If you find

any missing or damaged parts, call us immediately at (630) 366-6129 or email us at

4. Place the baseboard on your predetermined location. Make sure the board lays flat

on the surface. Leave a few inches of clearance behind the machine to allow for

power cords and water tubes.

ASSEMBLY INSTRUCTIONS

Stone tray

Pan splash guards

FIG. A

Stone tray

Hand rest

Right hood

Pan splash

guard

Drip pan