Cisco IP Conference Station 7935 Manuel du système - Page 25
Parcourez en ligne ou téléchargez le pdf Manuel du système pour {nom_de_la_catégorie} Cisco IP Conference Station 7935. Cisco IP Conference Station 7935 50 pages. Ip conference station
Également pour Cisco IP Conference Station 7935 : Manuel du système (36 pages), Manuel de démarrage rapide (37 pages), Instructions de référence rapide (2 pages)
Imprimer la page
Chapter 40
Cisco IP Phones
Tip
Directory Numbers
OL-7135-01
if you want to assign a specific directory number to a phone or if you plan to
implement authentication or encryption, as described in Cisco CallManager
Security Guide 4.1.
Cisco CallManager automatically disables auto-registration if you configure the
clusterwide security mode for authentication and encryption through the
Cisco CTL client.
If you do not use auto-registration, you must manually add phones to the
Cisco CallManager database or use the Bulk Administration Tool (BAT). BAT, a
plug-in application, enables system administrators to perform batch add, modify,
and delete operations on large numbers of Cisco IP Phones. Refer to the Bulk
Administration Tool Guide for Cisco CallManager for detailed instructions on
using BAT.
Using Directory Number Configuration in Cisco CallManager Administration,
you can configure and modify directory numbers (lines) that are assigned to
phones. Keep in mind, however, that directory numbers do not always associate
with devices (see the
"Managing Directory Numbers" section on page
You can configure up to 200 calls for a line on a device in a cluster, with the
limiting factor being the device. As you configure the number of calls for one line,
the calls available for another line decrease. Cisco IP Phones that support the
multicall display (such as a Cisco IP Phone 7960) support up to 200 calls per DN
and 2 calls per DN for non-multicall display devices (such as Cisco IP Phone
7905).
The Cisco IP Phone displays the following information about each line:
Unique call identifier (from 1 to 200). This identifier is consistent across all
•
multicall display devices that have a shared line appearance.
Call select status, an icon which shows the state of the currently selected call.
•
Call information such as calling party or called party.
•
•
Call state icon such as connected or hold.
Duration of a call
•
Directory Numbers
Cisco CallManager System Guide
40-30).
40-25