Cable Electronics CE Labs SW808HD Manuel d'instruction - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Cable Electronics CE Labs SW808HD. Cable Electronics CE Labs SW808HD 17 pages. High definition matrix switch

Imprimer la page
MATRIX CONTROL PANEL OPERATIONS

Input/Output Switching Key Operation Mode

The front panel keys of the Matrix system are used for fast audio/video
switching (for ils refer to the Front Panel Key Functions).
Operation
Operation consists of three basic steps:
• Choose the Switching Method
• Select the Output Channel
• Select the Input Channel.
Switching Methods
Two primary switching methods are used, either Synchronous
audio/video switching or separate switching.: Use the front panel
Audio and Video keys to select Audio/Video Switching, Audio
Switching Only, or Video Switching Only. An indicator shows if the
function is selected.
Output Channel
OUT Row 1-8 keys on the front panel represent connection of output
channels 1 to 8 to
peripheral equipment.
Input Channel
IN Row 1-8 keys on the front panel represent input channels 1 to 8 for
connection of the signal source to be switched to the selected output
channel.

Front Panel Key Functions

P
a
t r
F
u
n
t c
o i
n
K
e
y
1
2
3
F
u
n
t c
o i
n
LCD display shows current matrix
connection status and operation.
Output channel selection keys used for
selecting audio/video output channels
or for selection of Status Retrieve or
Stored Number.
Input channel selection keys used for
selecting audio/video input channels or
for selection of Status Retrieve or
Stored Number.

Examples for Selecting Matrix Switching Functions:

Example 1 (Audio and Video Switching): Using a SW808HD matrix
having all the input/output ports properly connected to the equip-
ment. There are two methods to set channel 1 audio/video to chan-
nels 2, 3 and 5 as output and channel 3 audio/video to channel 6 for
output:
First method: In the lower right corner of the blue area, enable the
Video and Audio functions (check the white boxes). To complete the
switching operation, directly click on the corresponding
the matrix to turn them into
Second method: The following 3 steps sets the switching operation of
Audio/Video input channel 1 to output channels 2, 3 and 5 while at the
same time switch Audio/Video input channel 3 to output channel 6.
Step 1: In the lower right corner of the blue area, enable the
Video and Audio functions (check the white boxes),
Use the lower scroll bar to view
additional columns
.
icons on