Cable Electronics HSW44C Plus Manuel d'instruction - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Cable Electronics HSW44C Plus. Cable Electronics HSW44C Plus 17 pages. 4x4 hdmi matrix switch with cat5 output and up to 60khz ir

Imprimer la page
Command Set
COMMAND
ACTION
ST
System Status
A1
Output A select Input 1
A2
Output A select Input 2
A3
Output A select Input 3
A4
Output A select Input 4
B1
Output B select Input 5
B2
Output B select Input 6
B3
Output B select Input 7
B4
Output B select Input 8
COMMAND
ACTION
VR
Firmware Version
C1
Output C select Input 1
C2
Output C select Input 2
C3
Output C select Input 3
C4
Output C select Input 4
D1
Output D select Input 5
D2
Output D select Input 6
D3
Output D select Input 7
D4
Output D select Input 8
19
Display Side
Method A: Push button for switching input channels
Press the INPUT SELECT push button to switch the input source on the respective output
port connected to the matrix receiver in sequential order. The selected input source will
be displayed on the seven segment display of INPUT CHANNEL.
Method B1: IR remote control for switching input channels
Select the input channel by pressing Source Selection 1 to Source Selection 4.
Or you can use left
and right
and select the input channel in ascending and descending order respectively. Th
setting will be effective in a couple of seconds.
Switch input port in descending order*
Switch input port in ascending order*
Switch the display channel at the remote
SOURCE SEL. 1
site to input port 1
Switch the display channel at the remote
SOURCE SEL. 2
site to input port 2
Switch the display channel at the remote
SOURCE SEL. 3
site to input port 3
Switch the display channel at the remote
SOURCE SEL. 4
site to input port 4
Note
Right (
) button to switch input source in ascending
order (1, 2, 3, 4, 1, 2, ......)
Left (
) button to switch input source in descending
order (1, 4, 3, 2, 1, 4, ......)
Method B2: IR remote control for controlling the HDMI sources
Users can use the corresponding IR remote to control the HDMI source.
button to enter IR control mode
20