Sony 49WD755 Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Sony 49WD755. Sony 49WD755 40 pages.

Imprimer la page

Sound

Sound Mode

Select according to content you want to

enjoy.

Reset

Reset [Equaliser], [Clear Voice], [Auto

Volume], [Balance] and [Volume Offset]

settings.

Equaliser

Adjusts sound frequency settings.

Clear Voice

Makes voices sound clearer.

Auto Volume

Minimizes the difference in volume level

between all programmes and adverts.

Balance

Emphasises left or right speaker balance.

Volume Offset

Adjusts the volume level of the current

input relative to other inputs.

Dual Sound

Sets the sound from the speaker to

[Mono], [Stereo], [A] or [B].

Note

• If the signal is very weak, the sound becomes

monaural automatically.

• If the stereo sound is noisy when receiving a

NICAM programme, select [Mono]. The sound

becomes monaural, but the noise is reduced.

• The [Dual Sound] setting is memorized for

each programme position.

• You cannot listen to stereo broadcast sound

when [Mono] is selected.

Hint

• If you select other equipment connected to the

TV, set [Dual Sound] to [Stereo], [A] or [B].

Advanced Settings

Dynamic Range: Compensates for

differences in the audio level

between different channels.

Note

• The effect may not function or may vary

depending on the programme regardless of

the [Dynamic Range] setting.

Dolby Digital Plus Out: Select [Auto] to

pass through Dolby Digital Plus

stream to ARC when Dolby Digital

Plus is available through connected

Audio System.

During Dolby Digital Plus stream is

output, Digital Audio Out (optical)* is

muted.

Select [Off] to convert Dolby Digital

Plus stream to Dolby Digital for both

ARC (Audio system) and Digital Audio

Out (optical)*.

HE-AAC Audio Level: Adjust the HE-

AAC audio sound level.

MPEG Audio Level: Adjusts the MPEG

audio sound level.

* Only on limited region/country/TV model.

Screen

Screen Format

For details about Screen Format, see

page 13.

Auto Format

Automatically changes [Screen Format] to

match the input signal.

4:3 Default

Sets the default [Screen Format] for a 4:3

input signal.

Auto Display Area

Automatically adjusts the picture to the

most appropriate display area.

Display Area

Adjusts the picture display area.

Horizontal Shift

Adjust the horizontal position of the

picture.