Epson L200 Manuel d'entretien - Page 38
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Epson L200. Epson L200 47 pages. Color inkjet printer
Également pour Epson L200 : Spécifications (4 pages), Manuel de l'utilisateur (4 pages), Instructions (4 pages), Commencer ici (2 pages), Manuel de l'utilisateur (2 pages), Avis et garantie (12 pages)
Imprimer la page
L200/L201/L100/L101
3.1 Overview
This section provides information to maintain the printer in its optimum condition.
3.1.1 Cleaning
Except for the printhead, there are no other mechanism parts or units that require periodic cleaning. However, if
need arises, clean the component observing the following instructions.
Instructions for cleaning
Exterior parts such as housing
Wipe dirt off with a soft clean cloth moistened with water. For glossy or transparent parts, use of unwoven cloth is
recommended to avoid scratching those parts.
Inside of the printer
Remove paper dust with a vacuum cleaner.
Rubber or plastic rollers such as an LD roller used to feed paper
If paper dust adhered to the rollers decreases the frictional force of the rollers and the rollers cannot properly feed
paper, wipe off the paper dust with a soft cloth moistened with diluted alcohol.
Instructions for cleaning ink stains
Wipe the stains off with a cloth wrung out of diluted alcohol.
Do not use alcohol for cleaning the transparent parts. Doing so may cause them to get
cloudy.
When wiping paper dust off the LD roller, be careful not to rub against the surface
asperity.
To minimize the effect on the parts, use diluted alcohol such as 70% diluted ether.
After using alcohol for cleaning, make sure to wipe the part off with a soft dry dust-free
cloth to remove alcohol traces fully.
3.1.2 Lubrication
The type and amount of the grease used to lubricate the printer parts are determined based on the results of the
internal evaluations. Therefore, refer to
procedures below, and apply the specified type and amount of the grease to the specified part of the printer
mechanism.
Before applying the grease, make sure to wipe off old grease completely with BEMCOT.
Grease
Type
Grease
Grease
Grease
Tools
Injector
Brush
Maintenance
" 3.2 Lubrication Points and Instructions (p39)"
Name
G-45 (TBD)
G-71
G-74
Name
EPSON Part Code
1033657 (TBD)
1304682
1409257
Availability
O
O
Overview
Revision A
for the repairing
Supplier
EPSON
EPSON
EPSON
EPSON Part Code
---
---
Confidential
38