Epson L3110 Series Commencer ici - Page 2

Parcourez en ligne ou téléchargez le pdf Commencer ici pour {nom_de_la_catégorie} Epson L3110 Series. Epson L3110 Series 4 pages.
Également pour Epson L3110 Series : Manuel rapide (48 pages), Manuel rapide (40 pages), Manuel rapide (48 pages), Manuel rapide (48 pages), Manuel rapide (36 pages), Commencer ici (2 pages)

Imprimer la page

Close the black ink tank cap.

Repeat the previous steps for the other colors.

Close the ink tank cover.

Turn on and charge the ink

Connect the power cord to the back of the product and to

an electrical outlet.

Caution:

Do not connect to your computer yet.

Press the

power button to turn on the product, then

wait for the ink light to stop flashing and stay on.

Press and hold the

power light starts to blink and ink charging begins.

Note:

Ink charging takes about 10 minutes. When the

light stops blinking, ink charging is complete.

Caution:

Do not turn off the product, open the front cover, or

load paper while the product is charging or you'll waste ink.

Note:

Use the ink bottles included with the printer to set up the

product. Part of the ink will be used to charge the print head. These

bottles may print fewer pages compared with subsequent ink bottles.

Load paper

See the online User's Guide for information about loading

capacity and available paper types and sizes.

Make sure the product is not charging ink. Then flip the

feeder guard forward, raise the paper support, and tilt it

backwards slightly.

Slide the edge guides all the way out.

stop button for 5 seconds until the

power